How To Use VGN WEB HUB?

VGN WEB HUB is an independently developed web driver by VGN, allowing users to customize their keyboards without downloading software. Currently, VGN WEB HUB only supports the VGN A75. Visit VGN WEB HUB to customize your keyboard.

Keyboard Settings

Visit VGN WEB HUB and connect your keyboard to make settings. The language displayed by the web driver will switch according to your browser's language. Only Chinese and English are supported at present.

Lighting Settings

You can select lighting effects on this page.
The VGN A75 keyboard currently has 20 preset lighting effects to choose from (including flashing along with music).
If you don’t like the preset lighting effects, you can also customize and adjust the light color, speed, and brightness.
You can also set the lighting color of individual keys in "Light Editor".

Remap Settings

1.You can remap keyboard keys here.
2.Click the key you want to modify.
3.Press the key you want to assign in the " Combination" menu.
4.Click Confirm on the right to complete the modification.
5.To restore the initial settings, simply click "Reset".
6.In the menu bar, keys can also be set as system function keys, such as Play/Pause, Volume Up, or Volume Down.
7.Keys can be set as combination keys, allowing you to choose Win/Ctrl/Shift/Alt + other keys.
8.Keys can be set as mouse functions, triggering mouse button functions as configured when pressed.

Fn Layer Remap Settings

1.You can remap keyboard keys here.
2.Click the key you want to modify.
3.Press the key you want to assign in the "Combination" menu.
4.Click Confirm on the right to complete the modification.
5.To restore the initial settings, simply click "Reset ".
6.In the menu bar, keys can also be set as system function keys, such as Play/Pause, Volume Up, or Volume Down.
7.Keys can be set as combination keys, allowing you to choose Win/Ctrl/Shift/Alt + other keys.
8.Keys can be set as mouse functions, triggering mouse button functions as configured when pressed.

Advanced Macro Settings

1.Click the "Create New Macro" icon to create a new macro project.
2.Select the new macro project and click "Start ".
3.Record the macro you need. (You can modify the loop count and interval time as needed.)
4.Click "Stop " to complete the macro recording. After recording, click "Save".
5.In "Key Setting" or "Fn Settings", select a key to apply the macro we just recorded.
6.Press the key you set to run the macro.

Magnetic Switch Settings

1.Click " StrokeSetting" to set the trigger travel when pressing and releasing keys.
2.We provide 3 preset modes for quickly experiencing the charm of magnetic key switches.
3.If the preset modes do not meet your needs, you can set key trigger travel that suits your needs in "Custom". (You can set it for individual keys and enable quick trigger.)

DKS Settings (Dynamic Key Travel)

One key can achieve 4 functions: You can bind 1 to 4 functions according to four different pressing intensity levels. Click a key and set the desired functions for different trigger travels to bind dynamic key travel.
1.Set the different keys you want to trigger (up to 4 keys).
2.Click the "+" icon to achieve single trigger.
3.Drag the blue dot and hold it until the next "+" icon to continuously trigger the key until the next travel is released.
4.Drag the blue dot across several "+" icons to achieve continuous key triggering.
5.After setting, click "Confirm" for the functions to take effect.
Example: After fully pressing and releasing "Q", "QWER" will be triggered.
If "Q" is not fully pressed and released, "QR" will be triggered.
If "Q" is pressed and held without releasing, "QWWW" will be triggered.

Light Speed Settings

The Light Speed Mode optimizes your keyboard's input speed. When enabled, each keypress will respond as quickly as possible. Up to four keys are supported.