Dragonfly Y2 V2 MasterGT / Pro Max / Pro / Plus

1.Introduction

2. Quick Start

Wired ModeWireless Mode

The bottom mode switch is set to 2.4G. Press and hold the left, middle, and right keys for 3 seconds to enter pairing mode—the yellow light flashes rapidly for 20 seconds. Once connected successfully, the indicator light stays on for 3 seconds and then turns off. If the connection times out, it enters reconnection state, with the yellow light flashing slowly for 5 seconds.

BT ModeThe bottom mode switch is set to Bluetooth. Press and hold the left, middle, and right keys for 3 seconds to enter pairing mode—the yellow light flashes rapidly for 180 seconds. Once connected successfully, the indicator light stays on for 3 seconds and then turns off; if the connection times out, it enters reconnection state, with the yellow light flashing slowly for 5 seconds.
Clear Bluetooth pairing: Press and hold the combination of the middle key + right key for 3 seconds, then power on. The pink light flashes rapidly for 10 seconds to indicate the clearing is complete.

Sleep/Wake Mode: Button press or movement wakes the mouse from sleep
Factory Reset: Available via driver settings
System Compatibility: Win7/Win8/Win10/Win11/MacOS/BIOS

DPl Set

Polling Rate SetBattery Indication