User Manual For VGN OMNISOUND (ZHOUTING) Headsets
VGN OMNISOUND
Product List
1.USB to USB-C Adapter
2.Mic Foam Cover
3.Headset
4.External Microphone
Button Instructions
1.Microphone Port
2.7.1 Surround & Lighting Toggle
3.Volume +/-
4.Mic Switch
5.USB to USB-C Adapter
Product Parameters
| Interface | USB/Type-C |
| Driver Unit Size | Ф53mm Aluminum Foil Gold-Plated |
| Impedance | 32ohm ±10% |
| Frequency Response | 20Hz-20KHz |
| Rated Value | 5V=1A |
| Microphone Specifications | Ф6.0*2.7mm |
| Microphone Sensitivity | -32±3dB |
| Microphone Port | 3.5mm |
| Power Supply Voltage | USB5.0V |
| Cable Length | 2.0±0.1M |
Operating Instructions
| Button | Function | Operation | Steps |
|---|---|---|---|
| 7.1 | Virtual 7.1 / Ear Shell Light Switch | Single Click / Double Click | The headset defaults to Music Mode + ear shell light when powered on.
|
| Microphone | Microphone Mute | Single Click | In Call Mode:
|
| +/- | Volume +/- | Roll Volume Knob | 1. Slide up: Volume +; Slide down: Volume -.
|
Connection mode
1.The product supports Android/iOS mobile devices, and is compatible with smartphones, tablets, laptops, desktops, PS4, PS5, Switch and more.
2.Please refer to the diagram for headset operation instructions.
3.Note: Follow the guide to download and install the PC software for advanced headset customization.
VGN OMNISOUND PRO
Bluetooth name: "VGN ZHOU"
Product List
1.Headset
2.External Microphone
3.Mic Foam Cover
4.2.4G Transmitter
5.1.5m Headset Cable
Button Instructions
1.Headset Audio/Charging Port
2.Built-in Mic
3.Mic Mute
4.External Mic Jack
5.2.4G/BT (2.4G Wi-Fi/Bluetooth)
6.Volume +/-
7.Power Button
8.Pairing Indicator Light
9.7.1 Surround/Lighting Switch
10.2.4G Transmitter (USB Port)
11.2.4G Transmitter (USB-C Port)
Product Parameters
| Operating Modes | Bluetooth, 2.4G, Wired |
| Battery Capacity | 2000mAh |
| Driver Unit Size | Φ53mm Foil Gold-Plated |
| Operating Frequency | 2.4–2.480GHz |
| Connection Range | ≥10m |
| Rated Value | 5V=1A |
| Charging Time | <4H |
| Microphone Specification | Φ6.0*2.7mm |
| Microphone Sensitivity | -32±3dB |
| Bluetooth Version | 6 |
| 2.4G Low Latency | <30ms |
| Battery Life | >100H (with headset lights off) |
| Operating Voltage | 3.7V |
| Driver Distortion | ≤3% |
Operating Instructions
| Button | Function | Operation | Steps |
| Power Button | Power On/Off | Long Press (2s) | 1. In off state: Long press for 2s to power on; prompt tone "Power On"; ear shell light turns on, pairing light flashes. 2. In on state: Long press for 2s to power off; prompt tone "Power Off"; ear shell light and pairing light turn off. |
| Connection/Disconnection | / | 1. When paired with a device: Prompt tone "Connected"; pairing light stays on. 2. In Bluetooth mode: Turn off Bluetooth; prompt tone "Disconnected"; pairing light flashes. |
|
| Answer/Hang Up/Reject/Play/Pause | Single Click/Double Click | 1. In Bluetooth mode (incoming call): Single click to answer; single click again to hang up. 2. In Bluetooth mode (incoming call): Double click to reject. 3. In Bluetooth mode (music playback): Single click to play/resume; single click again to pause. |
|
| 2.4G/BT Pairing Mode | Long Press (5s) | In off state: Long press Power Button + 7.1 Button for 5s to re-enter pairing mode; prompt tone "Pairing". | |
| 7.1 Button | Virtual 7.1 / Ear Shell Light Switch | Single Click/Double Click | 1. Defaults to Music Mode on power-on: In Bluetooth mode, single click to enable Virtual 7.1; single click again to return to Music Mode. (For 2.4G PC connection: Single click enables 7.1 sound effect & equalizer.) 2. Ear shell light defaults to on: Double click to turn off; double click again to turn on. (For 2.4G PC connection: Customize light color/mode via PC software.) |
| Microphone Button | Microphone Mute | Single Click/Double Click | In call mode: Single click to mute (prompt tone "Mic Off"); single click again to unmute (prompt tone "Mic On"). |
| +/- | Volume +/- | Roll Volume Knob | 1. Slide up for Volume +; slide down for Volume -. (For 2.4G PC connection: Adjust via PC software.) 2. "Beep" prompt when volume reaches max/min (no prompt in music playback mode). |
| 2.4G | 2.4G/BT Mode Switch | Toggle Up/Down | 1. Toggle up for 2.4G mode: Prompt tone "Game Mode"; pairing light (green) stays on. 2. Toggle down for Bluetooth mode: Prompt tone "Bluetooth Mode"; pairing light (blue) stays on. |
Connection mode
The product supports Android/iOS mobile devices and is compatible with smartphones, tablets, laptops, desktops, PS4, PS5, Switch and more.
2.4G Wireless Connection:
1. Connect the USB/USB-C port of the 2.4G Transmitter to your device. The transmitter will then activate auto-pairing mode, with the pairing indicator light flashing green. Power on the headset and switch it to 2.4G Mode. The headset will pair with the 2.4G Transmitter, and you will hear the prompt tone "Connected". Pairing is now successful.
Important Notes:
1. Do not remove the side USB-C plug when using the USB port of the 2.4G Transmitter to connect to a device.
2. When using 2.4G Mode, follow the guide to download and install the PC software for advanced headset customization.
Bluetooth Connection:
Power on the headset and switch it to Bluetooth Mode. Use your device (smartphone, tablet, etc.) to search for the headset’s Bluetooth name "VGN ZHOU" and tap to pair. The headset is now successfully connected to your device via Bluetooth.
Wired Connection:
Connect the headset to your device via the USB port of the charging/data cable. The ear shell light will turn off automatically, and the headset (which remains powered on) will switch to Wired Headset Mode.
Charging Mode
Charge the headset via the dedicated charging cable.
Notes: Charging Current: ≤820mA. The headset will power off automatically during charging. When powered off, the charging indicator stays solid red; it turns solid green when fully charged.
Low Battery Alert: In 2.4G/Bluetooth Mode, the battery is considered low when voltage drops below 3.2V. A "Low Battery" prompt tone will sound every 3 minutes, with the red indicator flashing rapidly (the prompt tone will not interrupt audio playback).
Auto Power-Off: The headset will power off automatically with the prompt tone "Power Off" if it is not connected to any device or if the battery voltage drops below 3.1V.
Supplementary Notes
Built-in Microphone: Voice calls are available when the headset is powered on, with the call ENC function activated automatically. (When connected to a desktop via the 2.4G Transmitter, you can adjust the call volume and configure voice changer effects for the headset through the PC software.)
External Microphone: The built-in microphone will be disabled automatically once the external microphone is plugged in, and the external microphone will start working with the call ENC function activated automatically. (When connected to a desktop via the 2.4G Transmitter, you can adjust the call volume and configure voice changer effects for the headset through the PC software.)
VGN OMNISOUND PRO MAX
Bluetooth name: "VGN ZHOU"
Product List
1.Headset
2.External Microphone
3.Mic Foam Cover
4.2.4G Transmitter
5.1.5m Headset Cable
6.Charging dock
7.1.5-meter charging dock cable
Button Instructions
1.Headset Audio/Charging Port
2.Charging Pins on Dock
3.Built-in Microphone
4.Microphone Mute
5.External Microphone Jack
6.2.4G/BT
7.Volume +/-
8.Power Button
9.Pairing Indicator Light
10.7.1 Surround Sound/LED Light Switch
11.Charging Pins on Dock
12.Dock Light Switch
13.USB 2.0 Output Port
14.Type‑C Output Port
15.USB 2.0 Output Port
16.USB 2.0 Input Port
Product Parameters
| Operating Modes | Bluetooth, 2.4G, Wired |
| Battery Capacity | 2000mAh |
| Driver Unit Size | Φ53mm Foil Gold-Plated |
| Operating Frequency | 2.4–2.480GHz |
| Connection Range | ≥10m |
| Rated Value | 5V=1A |
| Charging Time | <4H |
| Microphone Specification | Φ6.0*2.7mm |
| Microphone Sensitivity | -32±3dB |
| Bluetooth Version | 6 |
| 2.4G Low Latency | <30ms |
| Battery Life | >100H (with headset lights off) |
| Operating Voltage | 3.7V |
| Driver Distortion | ≤3% |
Operating Instructions
| Button | Function | Operation | Steps |
| Power Button | Power On/Off | Long Press (2s) | 1. In off state: Long press for 2s to power on; prompt tone "Power On"; ear shell light turns on, pairing light flashes. 2. In on state: Long press for 2s to power off; prompt tone "Power Off"; ear shell light and pairing light turn off. |
| Connection/Disconnection | / | 1. When paired with a device: Prompt tone "Connected"; pairing light stays on. 2. In Bluetooth mode: Turn off Bluetooth; prompt tone "Disconnected"; pairing light flashes. |
|
| Answer/Hang Up/Reject/Play/Pause | Single Click/Double Click | 1. In Bluetooth mode (incoming call): Single click to answer; single click again to hang up. 2. In Bluetooth mode (incoming call): Double click to reject. 3. In Bluetooth mode (music playback): Single click to play/resume; single click again to pause. |
|
| 2.4G/BT Pairing Mode | Long Press (5s) | In off state: Long press Power Button + 7.1 Button for 5s to re-enter pairing mode; prompt tone "Pairing". | |
| 7.1 Button | Virtual 7.1 / Ear Shell Light Switch | Single Click/Double Click | 1. Defaults to Music Mode on power-on: In Bluetooth mode, single click to enable Virtual 7.1; single click again to return to Music Mode. (For 2.4G PC connection: Single click enables 7.1 sound effect & equalizer.) 2. Ear shell light defaults to on: Double click to turn off; double click again to turn on. (For 2.4G PC connection: Customize light color/mode via PC software.) |
| Microphone Button | Microphone Mute | Single Click/Double Click | In call mode: Single click to mute (prompt tone "Mic Off"); single click again to unmute (prompt tone "Mic On"). |
| +/- | Volume +/- | Roll Volume Knob | 1. Slide up for Volume +; slide down for Volume -. (For 2.4G PC connection: Adjust via PC software.) 2. "Beep" prompt when volume reaches max/min (no prompt in music playback mode). |
| 2.4G | 2.4G/BT Mode Switch | Toggle Up/Down | 1. Toggle up for 2.4G mode: Prompt tone "Game Mode"; pairing light (green) stays on. 2. Toggle down for Bluetooth mode: Prompt tone "Bluetooth Mode"; pairing light (blue) stays on. |
| Headset Dock Light Button | Controls Dock Lighting Effects | Single Click / Long Press | Defaults to Breathing Light Effect on power-on; single click to switch to Single-Color Mode with options including Red, Green, Blue, Orange, Cool White, Yellow, Light Blue, Pink and White; single click again to cycle through these lighting effects in sequence; long press for 3 seconds to turn off the current lighting effect; single click once more to reactivate it. |
Connection mode
The product supports Android/iOS mobile devices and is compatible with smartphones, tablets, laptops, desktops, PS4, PS5, Switch and more.
2.4G Wireless Connection:
1. Connect the USB/USB-C port of the 2.4G Transmitter to your device. The transmitter will then activate auto-pairing mode, with the pairing indicator light flashing green. Power on the headset and switch it to 2.4G Mode. The headset will pair with the 2.4G Transmitter, and you will hear the prompt tone "Connected". Pairing is now successful.
2. Connect the charging dock to your device, then plug the 2.4G Transmitter into the charging dock. Auto-pairing mode will be activated immediately, with the pairing indicator light flashing green. Power on the headset and switch it to 2.4G Mode. The headset will pair with the 2.4G Transmitter and emit the prompt tone "Connected", indicating a successful connection.
Important Notes:
1. Do not remove the side USB-C plug when using the USB port of the 2.4G Transmitter to connect to a device.
2. When using 2.4G Mode, follow the guide to download and install the PC software for advanced headset customization.
Bluetooth Connection:
Power on the headset and switch it to Bluetooth Mode. Use your device (smartphone, tablet, etc.) to search for the headset’s Bluetooth name "VGN ZHOU" and tap to pair. The headset is now successfully connected to your device via Bluetooth.
Wired Connection:
Connect the headset to your device via the USB port of the charging/data cable. The ear shell light will turn off automatically, and the headset (which remains powered on) will switch to Wired Headset Mode.
Charging Mode
1. Charge the headset via the dedicated charging cable.
2. Charge via the headset charging dock
Notes: Charging Current: ≤820mA. The headset will power off automatically during charging. When powered off, the charging indicator stays solid red; it turns solid green when fully charged.
Low Battery Alert: In 2.4G/Bluetooth Mode, the battery is considered low when voltage drops below 3.2V. A "Low Battery" prompt tone will sound every 3 minutes, with the red indicator flashing rapidly (the prompt tone will not interrupt audio playback).
Auto Power-Off: The headset will power off automatically with the prompt tone "Power Off" if it is not connected to any device or if the battery voltage drops below 3.1V.
Supplementary Notes
Built-in Microphone: Voice calls are available when the headset is powered on, with the call ENC function activated automatically. (When connected to a desktop via the 2.4G Transmitter, you can adjust the call volume and configure voice changer effects for the headset through the PC software.)
External Microphone: The built-in microphone will be disabled automatically once the external microphone is plugged in, and the external microphone will start working with the call ENC function activated automatically. (When connected to a desktop via the 2.4G Transmitter, you can adjust the call volume and configure voice changer effects for the headset through the PC software.)
