User Manual For VGN Dragonfly F1 V5 Wireless Mouse
Dragonfly F1 V5 Turbo / Turbo+ / Ultra
1.Introduction


2. Quick Start
Wired Mode
Wireless Mode

The bottom mode switch is set to 2.4G. Press and hold the left, middle, and right keys for 3 seconds to enter pairing mode—the yellow light flashes rapidly for 20 seconds. Once connected successfully, the indicator light stays on for 3 seconds and then turns off. If the connection times out, it enters reconnection state, with the yellow light flashing slowly for 5 seconds.
BT Mode

The bottom mode switch is set to Bluetooth. Press and hold the left, middle, and right keys for 3 seconds to enter pairing mode—the yellow light flashes rapidly for 180 seconds. Once connected successfully, the indicator light stays on for 3 seconds and then turns off; if the connection times out, it enters reconnection state, with the yellow light flashing slowly for 5 seconds.
Clear Bluetooth pairing: Press and hold the combination of the middle key + right key for 3 seconds, then power on. The pink light flashes rapidly for 10 seconds to indicate the clearing is complete.
Sleep/Wake Mode: Button press or movement wakes the mouse from sleep
Factory Reset: Available via driver settings
System Compatibility: Win7/Win8/Win10/Win11/MacOS/BIOS
DPl Set

Polling Rate Set

Battery Indication











